The Carina Advantage
Testimonials
Healthcare Professionals
How Hearing Works
FAQS
News and Events
About Otologics
Contact Us

 

 

 

 

 

 

 

Accessories
PROGRAMMING SYSTEM
The Carina implant is programmed according to the wearer's specific amplification needs. The Otologics programming system consists of:

Using OtoFit™ Fitting Software, the NOAHlink interface receives signals from the computer through the wireless connection and sends the signals to the implant via the radio frequency coil. Programming the implant is done in the same manner as programming traditional digital hearing aids. In addition, the Otologics Programming System provides the ability for extensive testing and diagnostics of the Carina Fully Implantable Hearing Device.


The CHARGER SYSTEM consists of the base station, charging coil, and charger body. To charge the implant, the wearer removes the charger body from the base station and places the coil on the skin, over the implant site. The charger body contains a clip that allows the charger to be attached to the belt of the wearer during charging. Typically, charging time will be about one hour and must be performed daily. While recharging the implant, the wearer can perform normal daily activities, turn the implant on and off, and adjust the volume.




A REMOTE is used for controlling the Carina Fully Implantable Device when the device is not being charged. The remote allows the wearer to turn the implant on and off, and to adjust the volume. To use the remote control, the wearer simply holds the remote against the skin over the implant.



 

 

 

 

Home | The Carina Advantage | Healthcare Professionals | How Hearing Works | Testimonials
News and Events | About Otologics | Careers | Contact Us
www.otologics.com
Terms of Use | Privacy Policy

© Copyright 2006. Otologics, LLC. All rights reserved.
Carina™ is a registered trademark of Otologics, LLC.